• ọkọlọtọ ibe

Otu ịghasa Extruder dị elu nke ọma

Nkọwa dị mkpirikpi:

Igwe ihe eji eme ihe nkedo plastik nwere ike ịhazi ụdị ngwaahịa plastik niile, dị ka ọkpọkọ, profaịlụ, mpempe akwụkwọ, mbadamba, panel, efere, eri, ngwaahịa oghere na ihe ndị ọzọ.A na-ejikwa otu skru extruder eme ọka.Otu ihe nkedo extruder igwe dị elu dị elu, ikike mmepụta dị elu, plasticization dị mma, na ike oriri dị ala.Igwe a na-apụ apụ na-ejigide elu gia siri ike maka nnyefe.Igwe extruder anyị nwere ọtụtụ uru.


Nkọwa ngwaahịa

Mkpado ngwaahịa

Vidiyo

Njirimara

Igwe ihe eji eme ihe nkedo plastik nwere ike ịhazi ụdị ngwaahịa plastik niile, dị ka ọkpọkọ, profaịlụ, mpempe akwụkwọ, mbadamba, panel, efere, eri, ngwaahịa oghere na ihe ndị ọzọ.A na-ejikwa otu skru extruder eme ọka.Otu ihe nkedo extruder igwe dị elu dị elu, ikike mmepụta dị elu, plasticization dị mma, na ike oriri dị ala.Igwe a na-apụ apụ na-ejigide elu gia siri ike maka nnyefe.Igwe extruder anyị nwere ọtụtụ uru.
 
Anyị na-arụpụtakwa ọtụtụ ụdị plastic extruders dị ka sj25 mini extruder, obere extruder, lab plastic extruder, pellet extruder, abụọ ịghasa extruder, PE extruder, ọkpọkọ extruder, mpempe akwụkwọ extruder, pp extruder, Polypropylene Extruder, pvc extruder na na.

Uru

1. Ogologo uzo n'etiti nri akpịrị na ịghasa iji melite mmepụta nke ukwuu
2. Usoro nchịkwa okpomọkụ ziri ezi na ngalaba ndepụta iji kwekọọ na plastik dị iche iche
3. Pụrụ iche ịghasa imewe nweta elu plasticizing na ngwaahịa àgwà
4. Gearbox nke elu torsion itule na-aghọta kwụsiri ike na-agba ọsọ
5. H udi etiti ka ibelata ịma jijiji
6. PLC panel panel iji hụ na mmekọrịta
7. Nchekwa ike, dị mfe maka mmezi

Nkọwa

SJ usoro Single ịghasa extruder (2)

Otu ịghasa Extruder

Dabere na 33: 1 L / D ruru maka ịghasa imewe, anyị emepụtala 38: 1 L / D ruru.E jiri ya tụnyere 33: 1 ratio, 38: 1 ratio nwere uru nke 100% plasticization, na-abawanye mmepụta ikike site 30%, belata ike oriri ruo 30% na iru fọrọ nke nta linear extrusion arụmọrụ.

Simens Touch Screen na PLC

Tinye mmemme nke ụlọ ọrụ anyị mepụtara, nwee Bekee ma ọ bụ asụsụ ndị ọzọ ka ọ bụrụ ntinye n'ime usoro ahụ

SJ usoro Single ịghasa extruder (1)
Otu ịghasa extruder a

Pụrụ iche imewe nke ịghasa

Emebere ịghasa na ihe owuwu pụrụ iche, iji hụ na ọ dị mma plasticization na ịgwakọta.Ihe agbazeghị agbaze enweghị ike ịgafe akụkụ a nke ịghasa, ezigbo ịghasa extrusion plastik

Owuwu gburugburu nke Barrel

Nri akụkụ gbọmgbọm na-eji usoro okirikiri, iji hụ na nri akụrụngwa kwụsiri ike ma na-abawanye ikike inye nri.

Owuwu gburugburu nke Barrel
Igwe ọkụ seramiiki jụrụ ikuku

Igwe ọkụ seramiiki jụrụ ikuku

Igwe na-ekpo ọkụ seramiiki na-eme ka ọ dị ogologo ndụ ọrụ.Nhazi a bụ ịbawanye ebe ndị na-ekpo ọkụ na-akpọtụrụ ikuku ka ha nwee mmetụta dị jụụ ka mma.

Igbe igbe dị mma

A ga-ahụta izi ezi Gear 5-6 ọkwa yana obere mkpọtụ n'okpuru 75dB.Kọmpat Ọdịdị ma na elu torque.

SJ usoro Single ịghasa extruder

Data teknụzụ

Nlereanya

L/D

Ike(kg/h)

Ọsọ rotary (rpm)

Ike moto (KW)

Ogologo etiti (mm)

SJ25

25/1

5

20-120

2.2

1000

SJ30

25/1

10

20-180

5.5

1000

SJ45

25-33/1

80-100

20-150

7.5-22

1000

SJ65

25-33/1

150-180

20-150

55

1000

SJ75

25-33/1

300-350

20-150

110

1100

SJ90

25-33/1

480-550

20-120

185

1000-1100

SJ120

25-33/1

700-880

20-90

280

1000-1250

SJ150

25-33/1

1000-1300

20-75

355

1000-1300

Ngosipụta ngwaahịa


  • Nke gara aga:
  • Osote:

  • Dee ozi gị ebe a ziga anyị ya

    Ngwaahịa ndị emetụtara

    • Line Pipe Extrusion PE dị elu nke ọma

      Line Pipe Extrusion PE dị elu nke ọma

      Video Description Hdpe ọkpọkọ igwe na tumadi eji maka amị ugbo ogbugba ọkpọkọ, drainage ọkpọkọ, gas ọkpọkọ, mmiri na-enye ọkpọkọ, cable conduit ọkpọkọ wdg PE pipe extrusion akara mejupụtara ọkpọkọ extruder, ọkpọkọ anwụ, calibration nkeji, jụrụ tank, ibupu-apụ. , cutter, stacker/coiler na akụkụ niile.Igwe na-emepụta ọkpọkọ Hdpe na-emepụta ọkpọkọ nwere dayameta site na 20 ruo 1600mm.Ọkụ nwere ụfọdụ magburu onwe atụmatụ dị ka kpo oku eguzogide, ịka nká na-eguzogide, elu n'ibu str ...

    • Ahịrị Extrusion PPR dị elu nke ọma

      Ahịrị Extrusion PPR dị elu nke ọma

      Nkọwa PPR ọkpọkọ na-ejikarị emepụta PPR ọkpọkọ mmiri ọkụ na oyi.PPR ọkpọkọ extrusion akara bụ nke extruder, ebu, agụụ calibration tank, ịgba jụrụ oyi tank, bupụ igwe, ọnwụ igwe, stacker na na.PPR ọkpọkọ extruder igwe na-ebupụ igwe na-ewere usoro ọsọ ọsọ ugboro, PPR ọkpọkọ ọkpọkọ na-anabata usoro igbutu na-enweghị ntụpọ na njikwa PLC, ịkpụ ogologo ogologo, na ịcha elu dị larịị.FR-PPR iko eriri PPR ọkpọkọ mejupụtara atọ ...

    • Ihe nrụpụta PVC Crust Foam Board Extrusion Line

      Ihe nrụpụta PVC Crust Foam Board Extrusion Line

      Ngwa PVC Crust Foam board mmepụta akara na-eji ngwaahịa WPC, dị ka ọnụ ụzọ, panel, osisi na na.Ngwaahịa WPC nwere undecomposable, deformation free, ụmụ ahụhụ na-eguzogide ọgwụ, ezigbo fireproof arụmọrụ, mgbape eguzogide, na mmezi free wdg Ma Usoro Flow ịghasa Loader maka Mixer → Mixer unit → ịghasa Loader maka Extruder → Conical Twin Screw Extruder → Mold → Calibration Table Tray jụrụ oyi → Bupụ igwe → igwe ihe eji eme ihe → Tebụl na-eme njem → Nyocha ngwaahịa ikpeazụ &...

    • Ihe nrụpụta PVC dị elu (PE PP) na ahịrị Extrusion Panel

      Ihe nrụpụta PVC dị elu (PE PP) na Extrusion Ogwe osisi ...

      Ngwa WPC mgbidi panel osisi mmepụta akara na-eji WPC ngwaahịa, dị ka ọnụ ụzọ, panel, osisi na na.Ngwaahịa WPC nwere undecomposable, deformation free, ụmụ ahụhụ na-eguzogide ọgwụ, ezigbo fireproof arụmọrụ, mgbape na-eguzogide ọgwụ, na mmezi free wdg. gbanyụọ igwe → Igwe ihe eji eme ihe → Tebụl njem → Nyocha ngwaahịa ikpeazụ & mbukota D...

    • Profaịlụ PVC dị elu dị elu yana ahịrị extrusion profaịlụ osisi plastik

      Profaịlụ PVC dị elu na-apụta na profaịlụ plastik osisi ...

      Ngwa PVC profaịlụ igwe na osisi plastic profaịlụ igwe na-eji na-emepụta ụdị nile nke PVC profaịlụ dị ka window & ụzọ profaịlụ, PVC waya trunking, PVC mmiri trough, PVC uko ụlọ panel, wpc ngwaahịa na na.PVC profaịlụ extrusion ahịrị na-akpọ UPVC window eme igwe, PVC Profaịlụ Machine, UPVC profaịlụ extrusion igwe, PVC profaịlụ na-eme igwe na na.Osisi plastic profaịlụ igwe na-akpọ wpc profaịlụ extrusion akara, osisi plastic mejupụtara igwe, w ...

    • Ọsọ PE PP dị elu (PVC) eriri extrusion ọkpọkọ

      Ọsọ PE PP (PVC) corrugated Pipe Extrusio...

      Nkọwa A na-eji igwe ọkpọkọ rọba emepụta ọkpọkọ rọba, bụ nke a na-ejikarị na drainage obodo, usoro nsị mmiri, ọrụ okporo ụzọ, ọrụ nchekwa mmiri nke ala ubi, ma nwee ike iji ya rụọ ọrụ njem ụgbọ mmiri mmiri mmiri, nke nwere oke dị iche iche. nke ngwa.Corrugated ọkpọkọ na-eme igwe nwere uru nke elu mmepụta, kwụsiri ike extrusion na elu ogo nke akpaaka.Enwere ike ịmepụta extruder dị ka c pụrụ iche ...

    • Ahịrị extrusion ọkpọkọ ndị ọzọ maka ire ere

      Ahịrị extrusion ọkpọkọ ndị ọzọ maka ire ere

      Sheel Ware Skin Tipe Plat Play Metal Play Mode Thire (MMS) 0.5- φ75- 中75- φ75- φ25- φ20 φ110- φ400 0.4 -1.6 500 LSSW630 φ250- φ630 0.4-1.2 600 LSSW800 φ315- φ800 0.2-0.7 850 Pipe Size HDPE Solid Pipe Steel waya skeleton mesikwuru plastic composite pipe ọkpụrụkpụ(mmk) (mmk) ) φ200 11.9 7.05 7.5 4.74 ...

    • High mmepụta PVC ọkpọkọ extrusion akara

      High mmepụta PVC ọkpọkọ extrusion akara

      Ngwa PVC Pipe Making Machine na-eji na-emepụta ụdị ọ bụla nke UPVC ọkpọkọ maka ọrụ ugbo na mmiri mmiri, ụlọ mmiri na-emepụta mmiri na drainage na eriri eriri, wdg.Ọkụ nrụgide Mmiri na-ebunye mmiri na njem ụgbọ mmiri ọkpọkọ ogbugba mmiri n'ubi na-abụghị nrụgide Ọwa mmiri Owuwu ụlọ mmiri drainage Cable conduits, Conduit Pipe, nke a na-akpọkwa pvc Conduit Pipe Ime Machine Process Flow Screw Loader f...

    • Ihe nrụpụta conical ejima ịghasa Extruder dị elu

      Ihe nrụpụta conical ejima ịghasa Extruder dị elu

      Njirimara SJZ usoro conical ejima ịghasa extruder nke a na-akpọkwa PVC extruder nwere uru dị ka mmanye extruding, ịdị mma dị elu, mgbanwe dị ukwuu, ndụ ogologo oge, ọsọ ọsọ dị ala, nbibi siri ike, ezigbo ngwakọta & mmetụta plasticization, na nhazi kpọmkwem nke ihe ntụ ntụ na wdg. Ogologo nhazi nkeji na-eme ka usoro kwụsiri ike na mmepụta a pụrụ ịdabere na ya n'ọtụtụ ngwa dị iche iche, nke ejiri maka ahịrị extrusion ọkpọkọ PVC, ahịrị ọkpọkọ ọkpọkọ, PVC WPC ...